Skip to content

IronPower

IronPower
  • Cost effective Power over Ethernet (PoE) midspan power injector that provides both power and data over standard Ethernet cabling
  • Connects to existing Ethernet switches using standard Category 5 cabling for data connectivity
  • Provides -48 VDC to power any 802.3af PoE compliant device to allow it to operate without a dedicated local power source

Overview

The IronPower power injector is extremely easy to use. Simply attach the PoE devices, connect IronPower to the network switch, and turn it on. All connections are located on the front of the unit for fast and easy access with dual-colored LEDs for monitoring the operation of each port. By centralizing power distribution in existing data closets, existing Uninterruptible Power Supply (UPS) systems and power conditioning systems can be leveraged to provide clean continuous power to all PoE devices connected to the IronPower power injector. IronPower power injectors are fully IEEE 802.3af compliant. It conforms to the 802.3 Ethernet standards when no inline power is supplied and complies with IEEE 802.3af using DTE Power via Media Dependent Interface (MDI) when power is supplied. The IronPower uses existing Ethernet standards to transmit data over Ethernet pairs 1/2 and 3/6 to provide maximum compatibility to ensure reliable connectivity. Power is supplied through the unused Ethernet pairs 4/5 and 7/8 conforming to the 802.3af standards for midspan Power over Ethernet. The IronPower's advanced auto-sensing algorithm allows it to automatically detect 802.3af compliant devices for Power over Ethernet operation. IronPower also supports the normal operation of legacy devices, such as ordinary Network Interface Cards (NICs) that do not expect power on their Ethernet connections.

Benefits

  • Cost effective installation without expensive electrician installation costs
  • Affordable powering solution for lower density installations
  • Grows with business requirements—up to six 802.3af PoE devices per IronPower 600
  • Automatic detection and protection of legacy and non-powered Ethernet terminals
  • Eliminates the need for bulky AC adapter, power cord and local Uninterruptible Power Supply (UPS)
  • Powers devices up to 100 meters using standard Category 5 cabling
  • Identification of faulty powered devices and safe shut down to protect the infrastructure and device
  • UPS power backup of the Foundry IronPower 600 in the data closet guarantees continuous operation of the WLAN APs and other Power over Ethernet devices
  • Centrally installed in a secure data closet prevents tampering of devices

Back to top

Features

  • Provides cost effective power for 802.3af PoE devices in a small footprint
  • Powers all major Wireless LAN and Bluetooth access points, Network Cameras, and IP Phones
  • Remote power for scattered topology devicest Safe powering by automatically detecting 802.3af PoE devices
  • Concise LED displays for monitoring each port's operation status. Normal, overload, or short-circuit conditions with separate indicators for main power supply and self-test monitoring
  • Shielded RJ-45 connectors ensures that power distribution does not interfere with network performance
  • Continuous monitoring of the powered device, shuts down in event of failure or power problem
  • Enhanced power management algorithms provides full power to each port and dynamically manages the total unit power budget
  • Backup capability of the powered devices through central UPS system
  • Easy and simple installation of Power over Ethernet devices—Plug and Play
  • IEEE 802.3af compliant
  • Class 1, 2, 3 device support

Back to top

Specifications

Number of Ports

  • IronPower 100: 1
  • IronPower 600: 6

Data Rates

  • 10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)

Power over Ethernet Output

  • Pin Assignment and Polarity: 4/5 (+V),7/8 (-V)
  • Output PowerVoltage: -48VDC
  • User Port Power: 15.4 W minimum
  • Aggregate Power (IronPower 600): 92 W

Input Power Requirements

  • AC Input Voltage: 90 to 264 VAC
  • AC Frequency: 47 to 63 Hz
  • AC Input Current (IronPower 100): 0.3 A at 110 VAC, 0.15 A at 240 VAC
  • AC Input Current (IronPower 600): 1.7 A at 115 VAC, 0.75 A at 230 VAC

Dimensions (IronPower 100)

  • 1.75" (H) x 4.17" (W) x 5.5" (D)
  • 44.4 mm (H) x 106 mm (W) x 140 mm (D)
  • Weight: 1.0 lbs (450 g)

Dimensions (IronPower 600)

  • 1.73" (H) x 11.06" (W) x 11.18" (D)
  • 44 mm (H) x 281 mm (W) x 284 mm (D)
  • Weight: 2.4 lbs (1.1 kg)

Front Panel Indicators

  • System Indicator: AC Power (Green)
  • User Indicator: Channel Power Active (Green)

Connectors

  • Shielded RJ-45, EIA 568A and 568B

Environmental Conditions

  • Operating Ambient Temperature: 32 – 104°F (0 to 40°C)
  • Operating Humidity: Maximum 90%, non-condensing
  • Operating Altitude: -1000 – 10,000 ft.(-304.8 – 304.8 m)
  • Storage Temperature: -4 – 167°F (-20 – 75°C)
  • Storage Humidity: Maximum 95%, non-condensing

Thermal Rating

  • 127.5 BTU (-48 VDC)

Mean Time Before Failure (IronPower 100)

  • 2,885,266 hours @ 25°C Ambient
  • 1,741,141 hours @ 40°C Ambient

Mean Time Before Failure (IronPower 600)

  • 133,211 hours @ 25°C Ambient
  • 69,033 hours @ 40°C Ambient

Regulatory Country Compliance

  • USA, Canada, EU, Japan, Australia, New Zealand

Electromagnetic Emission and Immunity

  • FCC Part 15, Class B
  • EN55022 Class B (Emissions)
  • EN50082-1 (Immunity)

Safety Approvals

  • UL 1950
  • CSA C22.2 No.950
  • EN 60950
  • GS EN 60950

Back to top

System Options

  • FIP-100: Foundry IronPower 100—Single Port Power Injector
  • FIP-600: Foundry IronPower 600—Six Port Power Injector
  • 70091-000: Foundry IronPower 600 19" Rack Installation Kit (optional)

Back to top

Back to top

How To Buy

  • Interested in this product? Contact sales to learn more!
  • Contact Sales

Related Links

In The News